Hướng dẫn sử dụng của Casio G-Shock Classic GW-M5610-1ER

8.7 · 23
PDF hướng dẫn sử dụng
 · 6 trang
hướng dẫn sử dụngCasio G-Shock Classic GW-M5610-1ER

Operation Guide 3159


Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of your
purchase, be sure to read this manual carefully.
Keep the watch exposed to bright light
The electricity generated by the solar cell of the watch is
stored by a rechargeable battery. Leaving or using the
watch where it is not exposed to light causes the battery
to run down. Make sure the watch is exposed to light as
much as possible.
When you are not wearing the watch on your wrist,
position the face so it is pointed at a source of bright
You should try to keep the watch outside of your sleeve
as much as possible. Charging is reduced significantly if
the face is covered only partially.

Bright Light

Solar cell









Rechargeable battery

Bright Light



Solar cell

(Converts light to

electrical power.)

Battery charges in the light. Battery discharges in the dark.

The watch continues to operate, even when it is not exposed to light. Leaving the
watch in the dark can cause the battery to run down, which will result in some watch
functions to be disabled. If the battery goes dead, you will have to re-configure watch
settings after recharging. To ensure normal watch operation, be sure to keep it
exposed to light as much as possible.





Some or all





The actual level at which some functions are disabled depends on the watch model.
Frequent display illumination can run down the battery quickly and require charging.
The following guidelines give an idea of the charging time required to recover from a
single illumination operation.

Approximately 5 minutes exposure to bright sunlight coming in through a window

Approximately about 8 hours exposure to indoor fluorescent lighting

Be sure to read “Power Supply” for important information you need to know
when exposing the watch to bright light.
If the display of the watch is blank...
If the display of the watch is blank, it means that the watch’s Power Saving function
has turned off the display to conserve power.
See “Power Saving Function” for more information.
Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage
or loss suffered by you or any third party arising through the use of this product or
its malfunction.
About This Manual
Depending on the model of your watch, display text appears either as dark figures
on a light background or light figures on a dark background. All sample displays in
this manual are shown using dark figures on a light background.
Button operations are indicated using the letters shown in the illustration.
Each section of this manual provides you with the information you need to perform
operations in each mode. Further details and technical information can be found in
the “Reference” section.

General Guide

Press C to change from mode to mode.
In any mode (except when a setting screen is on the display), press B to illuminate
the display.
Timekeeping Mode
Press C.
Countdown Timer Mode Stopwatch Mode
Alarm Mode
World Time Mode

Radio-controlled Atomic Timekeeping

This watch receives a time calibration signal and updates its time setting accordingly.
This watch is designed to pick up the time calibration signals transmitted in Germany
(Mainflingen), England (Anthorn), the United States (Fort Collins), China (Shangqiu),
and Japan (Fukushima, Fukuoka/Saga).
Current Time Setting
This watch adjusts its time setting automatically in accordance with a time calibration
signal. You also can perform a manual procedure to set the time and date, when
The first thing you should do after purchasing this watch is to specify your
Home City (the city where you normally will use the watch). For more
information, see “To specify your Home City”.
When using the watch outside the areas covered by the time signal transmitters, you
will have to adjust the current time setting manually as required. See “Timekeeping”
for more information about manual time settings.
The U.S. time calibration signal can be picked up by the watch while in North
America. The term “North America” in this manual refers to the area that consists of
Canada, the continental United States, and Mexico.
As of December 2009, China does not use Daylight Saving Time (DST). If China
does go to the Daylight Saving Time system in the future, some functions of this
watch may no longer operate correctly.
Using this watch in a country covered by a time calibration that is different from the
countries it supports may result in incorrect time indication due to local application of
summer time, etc.

To specify your Home City

1. In the Timekeeping Mode, hold down A until the city
code starts to flash, which indicates the setting screen.
2. Press D (east) and B (west) to select the city code
you want to use as your Home City.
LIS, LON : Lisbon, London
MAD, PAR, ROM, BER, STO : Madrid, Paris,
Rome, Berlin, Stockholm
ATH : Athens
MOW : Moscow
HKG, BJS, TPE : Hong Kong, Beijing, Taipei
SEL, TYO : Seoul, Tokyo
HNL : Honolulu
ANC : Anchorage
YVR, LAX: Vancouver, Los Angeles
: Edmonton, Denver
MEX, CHI : Mexico City, Chicago
MIA, YTO, NYC: Miami, Toronto, New York
YHZ : Halifax
YYT : St.Johns

PM indicator


City code

Hour : Minutes


3. Press A to exit the setting screen.
Normally, your watch should show the correct time as soon as you select your Home
City code. If it does not, it should adjust automatically after the next auto receive
operation (in the middle of the night). You also can perform manual receive or you
can set the time manually.
The watch will receive the time calibration signal automatically from the applicable
transmitter (in the middle of the night) and update its settings accordingly. For
information about the relationship between city codes and transmitters, see
“Important!” under “Time Calibration Signal Reception” and “Transmitters”.
See the maps under “Approximate Reception Ranges” for information about the
reception ranges of the watch.
You can disable time signal reception, if you want. See “To turn auto receive on and
off” for more information.
Under factory default settings, auto receive is turned off for all of the following city
codes: MOW (Moscow), HNL (Honolulu), and ANC (Anchorage). For details about
turning on auto receive for these city codes, see “To turn auto receive on and off”.
Time Calibration Signal Reception
There are two different methods you can use to receive the time calibration signal:
auto receive and manual receive.
Auto Receive
With auto receive, the watch receives the time calibration signal automatically up to
six times a day (five times a day for the Chinese calibration signal). When any auto
receive is successful, the remaining auto receive operations are not performed. For
more information, see “About Auto Receive”.
Manual Receive
Manual receive lets you start a time calibration receive operation with the press of a
button. For more information, see “To perform manual receive”.
When getting ready to receive the time calibration signal, position the watch as
shown in the nearby illustration, with its 12 o’clock side pointing towards a window.
This watch is designed to receive a time calibration signal late at night. Because of
this, you should place the watch near a window as shown in the illustration when you
take it off at night. Make sure there are no metal objects nearby.
12 o’clock
Make sure the watch is facing the right way.

Hướng dẫn sử dụng

Xem hướng dẫn sử dụng của Casio G-Shock Classic GW-M5610-1ER miễn phí tại đây. Bạn đã đọc hướng dẫn sử dụng nhưng nó có giải đáp được thắc mắc của bạn không? Hãy gửi câu hỏi của bạn trên trang này cho các chủ sở hữu của Casio G-Shock Classic GW-M5610-1ER khác. Đặt câu hỏi của bạn tại đây

Bạn có câu hỏi nào về Casio G-Shock Classic GW-M5610-1ER không?

Bạn có câu hỏi về Casio G-Shock Classic GW-M5610-1ER và câu trả lời không có trong cẩm nang này? Đặt câu hỏi của bạn tại đây. Cung cấp mô tả rõ ràng và toàn diện về vấn đề và câu hỏi của bạn. Vấn đề và câu hỏi của bạn được mô tả càng kỹ càng thì các chủ sở hữu Casio G-Shock Classic GW-M5610-1ER khác càng dễ dàng cung cấp cho bạn câu trả lời xác đáng.

Số câu hỏi: 0

Thông số kỹ thuật sản phẩm

Dưới đây, bạn sẽ tìm thấy thông số kỹ thuật sản phẩm và thông số kỹ thuật hướng dẫn sử dụng của Casio G-Shock Classic GW-M5610-1ER.

Thương hiệu Casio
Mẫu G-Shock Classic GW-M5610-1ER
Sản phẩm Đồng hồ đeo tay
Ngôn ngữ Anh
Loại tập tin Hướng dẫn sử dụng (PDF)
Chi tiết kỹ thuật
Chống sốc
Máy nhận tín hiệu vô tuyến EU, US, JP, CH
Chức năng giờ thế giới
Đồng hồ bấm giờ
Độ chính xác đồng hồ bấm giờ 0.01 giây
Khả năng đo của đồng hồ bấm giờ 24 h
Máy bấm giờ đếm ngược
Phạm vi thời gian đếm ngược 1 - 1440 min
Chức năng báo thức
Chức năng ngủ ngắn
Không thấm nước
Áp suất chịu nước 20 ATM
Loại đồng hồ cơ học Pin mặt trời Tough Solar
Máy ghi thời gian -
Chronometer -
Kiểu mặt đồng hồ -
Loại đồng hồ Đồng hồ đeo tay
Loại lịch Ngày
Thiết kế
Loại kính đồng hồ Mineral
Chất liệu vỏ đồng hồ Resin
Chất liệu dây đeo Resin
Màu sơn nhà Màu đen
Màu chủ đạo dây đeo Màu đen
Màu chủ đạo mặt số đồng hồ Màu đen
Thiết kế sản phẩm -
Dáng túi Hình chữ nhật
Loại giới tính Unisex
Đèn chỉ thị báo mức pin
Trọng lượng & Kích thước
Chiều rộng 43.2 mm
Độ dày 12.7 mm
Chiều cao 46.7 mm
Trọng lượng 51.7 g
hiển thị thêm

Các câu hỏi thường gặp

Không thể tìm thấy câu trả lời cho câu hỏi của bạn trong cẩm nang? Bạn có thể tìm thấy câu trả lời cho câu hỏi của mình trong phần Câu hỏi thường gặp về Casio G-Shock Classic GW-M5610-1ER phía dưới.

Câu hỏi của bạn không có trong danh sách? Đặt câu hỏi của bạn tại đây

Không có kết quả