Hướng dẫn sử dụng của Epson LabelWorks LW-900P

(1)
  • Số lượng trang: 1
  • Loại tập tin: PDF
Read this document carefully to use this product safely and correctly.

Safety Instructions

For your safety, read the attached documents carefully to use this product correctly. After you have read all instructions, keep this manual handy for future reference and to make your concerns clear. Items below indicate safety precautions to protect users, their surroundings and their property from possible injury or damage. Precautionary notations are categorised as follows according to personal injury and damage to the equipment if the instructions are ignored or the equipment is misused.WARNING
This symbol indicates information that, if
ignored, could possibly result in serious
personal injury or even death due to incorrect
handling.
CAUTION
This symbol indicates information that, if
ignored, could possibly result in personal injury
or physical damage due to incorrect handling.
The following describes the meaning of each symbol
used in the precautions.
This indicates an important reminder.
This indicates a prohibited item.
This indicates a mandatory procedure.

User’s Guide

English

Troubleshooting

Problems
The product does not work if a print job is sent.
Is there any message displayed on the computer screen?
Check the content of message.
Is the printer driver installed?
Install the printer driver. s Label Editor User's Guide
Did you reboot the computer after installing the printer driver?
The printer driver may not be installed correctly unless the computer
is rebooted. Re-install the printer driver. s Label Editor User's
Guide
Is the product correctly connected to the computer?
Check the cable connecting the product and the printer.
s Connecting to your computer
Is the AC adapter connected?
Check the connection of the AC adapter.
s Connecting the AC adapter
Is the selected printer correct?
If a wrong printer is selected, printing cannot be done normally.
s Label Editor User's Guide
The power cannot be turned ON/OFF.
Is the power lamp ON?
This product does not have any power switch. The power turns ON
automatically if the AC adapter and the USB cable are connected.
To turn the power off, unplug the AC adapter from the product.
Characters are missing or faint.
Is the print head dirty?
Clean the print head. s When the printhead is dirty
The label is not automatically cut.
Is “Don't cut” selected?
Check the settings of the printer driver.
Is the cutter blade worn?
The cutter blade can eventually become dull and warn. If this
happens, contact the EPSON customer support centre for advice.
MEMO
If none of the above has solved the problem or the symptom is other than the above, contact the EPSON customer support centre.

Before use

1. Connecting Cables
MEMO
This product does not have a power switch. The power
turns ON automatically if the AC adapter and the USB
cable are connected. When the power is ON, the power
lamp on the front lights.
To check the status of the power lamp
s Checking the power lamp and half-cut lamp
Connecting the AC adapter
c
Make sure to use the dedicated AC adapter (AST1527Z).1. Insert the plug of the AC adapter firmly into the power socket on the rear of the product.2. Insert the power plug of the AC adapter into the outlet.
c
Do not unplug the AC adapter or USB cable while printing or feeding tape. Doing so interrupts printing or tape feeding, and may cause damage to the product.
Connecting to your computer
MEMO
Before connecting the product to your computer,
make sure to confirm the printer driver is installed on
it.
If the product is connected to the computer without
the printer driver installed, the “found new hardware
wizard screen appears. Click [Cancel], and install the
printer driver before use.
How to install the driver s Label Editor User's Guide
Turn the computer on in advance.1. Connect the USB cable to the product.
c
Make sure to use the supplied USB cable.2. Connect the other end of the USB cable to the USB terminal on the computer.
To the computer
MEMO
Confirm the shape and the direction of the connector
before connecting the USB cable.
Do not use a USB hub.
When connecting two or more products to one
computer s Label Editor User's Guide
2. Installing a tape cartridge
1. Remove the slack of the ink ribbon.2. Press the cover release button to open the compartment cover.
c
Do not hold the product by the cover.3. Install a tape cartridge. Insert it firmly as far as it will go.When installing a new tape or the tip of the tape is longer than usual, put the tape through the tape guide.
c
Do not pull out the tape forcibly by hand.4. Close the cover. Press the upper centre of the cover until it closes and snaps into place.
c
Be sure to insert the tape cartridge firmly as far as it will go. If the cover is closed without inserting the tape cartridge fully, the product or the tape cartridge may get damaged.

Specifications

Body
Dimensions Approx. 85 (W) x 182 (D) x 146 (H) (mm)
Weight Approx. 900g (excluding tape cartridge)
Usage conditions
Operating temperature 5 to 35 degrees C
Storage temperature -10 to 55 degrees C
Power supply
AC
adapter
Type AST1527Z1-1
Manufacturer Seiko Epson Corp.
Input AC100-240V, 0.9A, 50-60Hz
(dedicated adapter, power
cable only)
Output DC15V, 2.7A
Total output
power
41W
Supported tape width
6mm, 9mm, 12mm, 18mm, 24mm, 36mm

Part Names

1. Compartment cover2. Tape confirmation window3. Power socket4. USB connector5. Cover release button6. Power lamp7. Half-cut lamp8. Feed button9. Tape outlet slot10. Trimmer inlet slot11. Trimmer guide12. Trimmer table13. Tape cartridge compartment14. Securing hook15. Tape guide16. Trimmer box

Cleaning

When the exterior is dirty
Wipe the dirt off with a soft cloth. If it is very dirty, use a cloth wrung out of water.
c
Never use chemicals or solvents such as benzine, thinner, or alcohol, or use a chemical duster.
When the printhead is dirty
If the print becomes faint or some parts are missing, there may be some dirt on the printhead.Clean the print head with a cotton swab moistened with medical alcohol (commercially available ethanol).
2
1
4
3
Checking the power lamp and half-cut lamp
You can check the status of the product with the lamps.
Power lamp
Status of the lamp Status of the product
ON The power is on and the product is ready to operate.
Blinks (Same
interval for
ON/OFF)
Slow blink When preparing to print, printing or feeding.
Fast blink When cutting tape.
Blink (Interval for OFF is
longer.)
In an error status.
When a message appears on the computer screen: Check the
content of message.
When no message appears on the computer screen: Check the
status of the cover and the tape cartridge of the product.
If not improved, unplug the AC adapter once.
If the error occurs again even though the AC adapter is
reconnected, contact the EPSON customer support centre.
OFF The power is OFF.
The power turns ON automatically if the AC adapter and
the USB cable are connected to the product. Check the
connection of the cables.
6
10
7
5
8
9
12
11
16
13
14
15
Half-cut lamp
Status of the lamp Status of the product
ON When printing a label with the half-cut setting enabled.
Blinks (Same interval for
ON/OFF)
When making a half-cut.
Blink (Interval for OFF is
longer.)
In an error status.
When a message appears on the computer screen: Check the
content of message.
When no message appears on the computer screen: Check
the status of the cover and the tape cartridge of the product.
If not improved, unplug the AC adapter once.
If the error occurs again even though the AC adapter is
reconnected, contact the EPSON customer support centre.
OFF The half-cut setting is disabled.
How to remove the tape cartridge
c
Hold the cartridge by the tabs, and pull it straight out.
3. Feeding the tape
After setting a tape cartridge, make sure to feed tape. 1. Press on the product.Feed and Cut: Feeds the tape about 20mm and cuts it.Feed: Feeds the tape about 20mm.
4. Editing and printing a label
You can create label designs on your computer using the supplied editing software, then print the labels you created using this product.When using the product for the first time, install the supplied dedicated printer driver and editing software.For information on installation and operation of the software s Label Editor User's Guide
5. Printing labels
s Label Editor User's Guide
Rounding off the corners
The corners of printed labels can be rounded off by inserting them into the trimmer. Rounded labels can look better, and the rounded corners make the labels less likely to peel away after sticking. 1. Align a label to the trimmer guide on the trimmer table, then insert it as far as it will
go.
When trimming a “half-cut” label, fold it at the cut line, then insert it into the trimmer inlet slot with the fold first.
Cut line
Maintenance of the trimmer
Cleaning the trimmerRemove the trimmer box and clean the trimmer periodically.
c
Make sure to turn the power off before cleaning.1. Unplug the AC adapter to turn the power
off.
2. Remove the trimmer box.
Pull the box out by the tab on the bottom.3. Remove any paper chips with a cotton swab or similar.
4. Set the trimmer box back.
When removing the trimmer box, make sure
to turn the power off. If the product operates
without the trimmer box, injury or damage may
occur with the blade inside the product.
Keep your fingers away from the trimmer, as
there is a risk of injury.
Replacing the trimmer bladeThe trimmer blade may eventually become worn and dull. If this happens, contact the EPSON customer support centre.
2. Once the sound of cutting has stopped, take the label out. If the corners are not sufficiently rounded, repeat the trimming process.3. Turn over and align the label with the trimmer guide to trim the other end, then insert and trim it.
The trimmer does not function while printing
labels or when the compartment cover is open.
Be sure to insert the label thoroughly as far
as it will go. Also, insert it straight along the
trimmer guide. Otherwise, the label may not be
trimmed correctly.
Make sure the cutting sounds have stopped
before taking the label out. If the label is
removed during trimming, it may not be
trimmed correctly. If not, do it all over again.
Do not move the label when it is inserted in the
trimmer. If it is moved, it will be misaligned and
may not be rounded off correctly.
6mm-wide labels cannot be trimmed.
At the time of purchase, some paper chips may
remain in the trimmer box attributed to the cut
test in the manufacturing process.
6. Attaching labels
1. Peel off the backing paper.2. Attach the label and rub it firmly.
Turn the power off after use
1. Disconnect the USB cable. Disconnect it from both the product and the computer.2. Unplug the AC adapter. Unplug it from the outlet and the power socket of the product.
MEMO
To turn the power off, just unplug the AC adapter.
If you do not use the product for a long time
Remove the tape cartridge, and unplug the AC adapter
and USB cable from the product if you do not use
the product for a long time. Keep the product, AC
adapter, USB cable and tape cartridges in a cool, dark
place away from direct sunlight, high temperature or
humidity, magnetised items, vibrations or dust.
Do not use any damaged AC adapter or power
cable. Otherwise, damage, overheating or
smoking may occur, which may result in fire or
electric shock.
Do not touch the plug during thunderstorms.
When using this product
Do not apply any strong force or shocks to
the product such as standing on, dropping
or hitting it. Otherwise, the product may be
broken, which may result in fire or electric
shock. If it is damaged, turn off the power
immediately, unplug the AC adapter and then
contact the EPSON customer support centre.
Continuous use may result in fire or electric
shock.
Take care not to spill any beverage such as tea,
coffee or juice onto the product, or to spray
aerosol insecticide. It may cause malfunction,
fire, or electric shock. If any liquid has been
spilled on the product, turn off the power,
unplug the AC adapter immediately, and then
contact the EPSON customer support centre.
Continuous use may result in fire or electric
shock.
Do not touch the printhead because it becomes
very hot. Otherwise, there is a risk of burns.
Do not open any covers other than the
compartment cover. Doing so may result in fire
or electric shock. Always use the product as
instructed in this manual. Otherwise, damage
or injury may occur.
If any of the following abnormalities is
observed, turn off the power immediately,
unplug the AC adapter, and then contact the
EPSON customer support centre.
If smoke, strange odours or unexpected noises
come from the product
If liquid or foreign objects get inside the
product
If the product has been dropped or damaged
When handling the auto trimmer
When removing the trimmer box, make sure to
turn the power off.
If the product operates without the trimmer
box, injury or damage may occur with the blade
inside the product.
When cleaning the trimmer box, do not touch
the trimmer blade, as there is a risk of injury.
Do not insert anything other than labels into
the trimmer inlet slot. Otherwise, damage to
the trimmer may occur.
WARNING
When using the AC adapter and power
cable
Do not use any AC adapter or power cable
other than the dedicated AC adapter and power
cable. Do not use the AC adapter with other
than the specified voltage also. Otherwise,
damage, overheating, fire or electric shock may
occur.
Take the following precautions when handling
the AC adapter and power cable.
Make sure to avoid octopus wiring.
Make sure the plug is not dusty before
inserting it into an outlet.
Insert the plug firmly into the outlet.
Do not hold the plug with wet hands.
Do not pull the power cable when
disconnecting the plug. Be sure to hold the
plug when disconnecting it.
Do not make any modification to the AC
adapter or power cable.
Do not apply strong shocks to or put a heavy
object on the AC adapter or power cable.
Do not bend or twist the AC adapter or power
cable forcibly.
Do not place the AC adapter or power cable
near a heater.
When handling tape cartridges
Make sure to use a dedicated LC Tape.
Some types of tape cannot be cut by the cutter or the
trimmer. For the details, refer to the tape's manual.
Do not drop it or disassemble it. Doing so may cause
damage.
Do not pull out the tape forcibly by hand. Otherwise,
the tape cartridge may be broken and unusable.
s 3. Feeding the tape
Avoid using a tape cartridge without remaining tape.
Doing so may cause overheating of the printhead,
which may result in damage or malfunction.
MEMO
Tape cartridges contain ink ribbons. When disposing
of tape cartridges, make sure to follow the local
regulations for disposal.
Other cautions
Notes on usage
Do not touch the printhead.
Take care not to cut your fingers when cutting the
label with scissors.
Do not attach a label on human bodies, living things,
public facilities or other people's belongings.
About the printed labels
Depending on the environment labels are used in
and the nature of the object labels are attached to,
the following issues may occur:
Label:
Discolouration, faded characters,
peeling
Adhesive side: Adhesive residue, staining, damage
Carefully check the suitability of the label for the
intended purpose before use. EPSON takes no
responsibility for any damage or loss due to the
above mentioned causes.
When handling the auto cutter
Do not touch the tape outlet slot (where the
labels come out) during printing or when the
auto cutter is in operation. Otherwise, there is a
risk of injury.
When handling the half cutter
Do not touch the tape outlet slot (where the
labels come out) during printing or when the
auto cutter is in operation. Otherwise, there is a
risk of injury.
Others
Do not use or store the product, AC adapter,
power cable, USB cable or tape cartridges in the
following places.
In direct sunlight.
Where it may become extremely hot such as in
a vehicle with the windows closed.
Where it may become extremely hot such as
near a heater or the temperature becomes
very unstable such as near the exhaust duct of
an air conditioner.
Where the product may get wet due to a
shower or rain such as in a bathroom or
outdoors.
In a dusty place or where the product may be
exposed to smoke or steam such as near the
kitchen or a humidifier.
On an unstable place such as on a shaky table
or on an inclined place.
Where it might be subjected to vibration or
shock.
Near high-voltage power lines or something
that generates a magnetic field.
Keep the plastic bags used to contain the
product or this manual out of reach of children.
Children may suffocate if they swallow them or
put their heads into the bags.
CAUTION
When using the AC adapter
Do not use the AC adapter in a small, confined
space, or cover it with a cloth. Otherwise, the AC
adapter may overheat and deteriorate.
When using this product
Do not stand on the product or place it on an
unstable place such as on a shaky table or on
an incline. Otherwise, the product may fall and
cause injury.
To ensure safety, unplug this product before
leaving it unused.
Unable to trim the label correctly.
Did you trim it during printing?
The trimmer does not work during printing.
Is the compartment cover open?
The trimmer does not work if the compartment cover is open. Close
the cover.
Did you insert the label to the trimmer inlet slot correctly?
Insert the label straight along the trimmer guide.
s Rounding off the corners
Is the trimmer box full of paper chips?
Take out the trimmer box and remove the paper chips.
s Cleaning the trimmer
Is the trimmer blade worn?
The cutter blade can eventually become dull and worn. If this
happens, contact the EPSON customer support centre for advice.
Half-cut cannot be made correctly.
Is the “Half cut” setting enabled?
Check the settings of the printer driver.
Is “Don't half cut” selected?
Check the settings of the printer driver.
Is the blade for half-cut worn?
The cutter blade can eventually become dull and worn. If this
happens, contact the EPSON customer support centre for advice.
Unable to attach labels.
Did you peel off the backing paper?
Peel off the backing paper before attaching the label.
Are you attaching it to a dirty or rough surface?
The label may not adhere due to the material of the attachment
location or the environmental conditions.
Before cleaning, make sure to unplug the AC
adapter from the outlet.
Do not use a moistened cloth or solvents such
as alcohol, thinner or benzine.
Others
The supplied disc is a data CD-ROM for
computers. Do not play it in an audio CD player.
Otherwise a very loud sound may be emitted,
causing risk to both your hearing and your
audio equipment.
Be careful of continuous use of this product,
which may cause eye fatigue.
If your product is faulty, please read the included warranty card and consult the store you purchased it from. If you require further assistance contact your local EPSON customer support centre.
Please also find below the URL for the support centre:http://www.epson.co.uk/support

Bạn có câu hỏi nào về Epson LabelWorks LW-900P không?

Số câu hỏi: 0

Đơn giản chỉ cần đặt câu hỏi của bạn về Epson LabelWorks LW-900P cho các chủ sở hữu sản phẩm khác tại đây. Mô tả rõ ràng và chi tiết về vấn đề và thắc mắc của bạn. Bạn mô tả vấn đề và thắc mắc của bạn càng chi tiết thì các chủ sở hữu khác của Epson LabelWorks LW-900P sẽ trả lời càng chính xác.

Xem hướng dẫn sử dụng của Epson LabelWorks LW-900P miễn phí tại đây. Bạn đã đọc hướng dẫn sử dụng nhưng nó có giải đáp được thắc mắc của bạn không? Hãy gửi câu hỏi của bạn trên trang này cho các chủ sở hữu của Epson LabelWorks LW-900P khác. Đặt câu hỏi của bạn tại đây

Thông số kỹ thuật sản phẩm

Chung
Thương hiệu Epson
Mẫu LabelWorks LW-900P
Sản phẩm Máy in nhãn
8715946492735
Ngôn ngữ Anh
Loại tập tin PDF
In
Độ phân giải tối đa 360 x 360 DPI
In theo chiều dọc
Chiều cao in tối đa 27.1 mm
Tốc độ in 25 mm/s
Công nghệ in Truyền nhiệt
Cổng giao tiếp
Kết nối với máy tính
Giao diện chuẩn USB
Số lượng cổng USB 2.0 1
Cổng USB
Hiệu suất
Bộ nhớ trong (RAM) 100 MB
Mã vạch gắn liền CODABAR (NW-7),EAN128,EAN13,EAN8,ITF-14,PDF417,UPC-A,UPC-E
Chiều dài cố định Không
Cắt băng Tự động
Trọng lượng & Kích thước
Chiều rộng 182 mm
Độ dày 85 mm
Chiều cao 146 mm
Trọng lượng 900 g
Các đặc điểm khác
Kích thước (Rộng x Độ dày x Cao) 128 x 85 x 146 mm
Khả năng tương thích PC Display XGA (1024x768)
Nước xuất xứ Trung Quốc
null
Các yêu cầu dành cho hệ thống
Các hệ thống vận hành tương thích Windows 7 (32/64 bit), Vista (32/64 bit), XP (32/64 bit), Mac OS
Điều kiện hoạt động
Nhiệt độ cho phép khi vận hành (T-T) -5 - 35 °C
Nhiệt độ lưu trữ (T-T) -10 - 55 °C
Điện
Tiêu thụ năng lượng (Tiết kiệm Năng lượng) 13.63 W
Tiêu thụ năng lượng (tắt máy) 0.27 W
Tiêu thụ năng lượng (chế độ chờ) 0.7 W
Thiết kế
Màu sắc sản phẩm Green,Grey
Các số liệu kích thước
Số lượng cho mỗi tấm nâng hàng 90 pc(s)
Chiều rộng pa-lét 800 mm
Chiều dài pa-lét 1200 mm
Chiều cao pa-lét 990 mm
Số lượng mỗi lớp 15 pc(s)
Số lượng trên mỗi lớp pallet (UK) 15 pc(s)
Số lượng trên mỗi pallet (UK) 90 pc(s)
Chiều dài pallet (UK) 1200 mm
Chiều rộng pallet (UK) 1000 mm
Chiều cao pallet (UK) 990 mm
Thông số đóng gói
Trọng lượng thùng hàng 2120 g
Chiều sâu của kiện hàng 300 mm
Chiều cao của kiện hàng 140 mm
Chiều rộng của kiện hàng 237 mm
Số lượng mỗi gói 1 pc(s)
hiển thị thêm

Các câu hỏi thường gặp

Dưới đây, bạn sẽ tìm thấy những câu hỏi thường gặp nhất về Epson LabelWorks LW-900P.

Câu hỏi của bạn không có trong danh sách? Đặt câu hỏi của bạn tại đây